Top-of-rack switch firmware, rows C–B — STO
Réseau — transit et peering — STO
Ce qui est prévu
The top-of-rack switches in rows C to B of STO receive a firmware update. Each switch reloads once, which interrupts the network for the machines in its rack for about 90 seconds. Racks are done one at a time. Running workloads are not affected, only reachability during the reload. The interruption is counted against the SLA of the affected machines even though it is announced.
Chronologie
-
Terminée
All switches in rows C–B of STO are on the new firmware. Each rack was interrupted once, for under two minutes.
-
En cours
Maintenance has started with row C. Each rack will see about 90 seconds of interruption when its switch reloads.
-
Planifiée
The top-of-rack switches in rows C to B of STO receive a firmware update. Each switch reloads once, which interrupts the network for the machines in its rack for about 90 seconds. Racks are done one at a time. Running workloads are not affected, only reachability during the reload. The interruption is counted against the SLA of the affected machines even though it is announced.
Les heures sont affichées dans votre fuseau horaire ().
Pages liées
- État du serviceÉtat en direct des composants et centres de données gpuserver.io, sondés toutes les 60 s depuis cinq villes : disponibilité sur 90 jours et incidents depuis 2022.
- Historique des incidentsChaque incident et fenêtre de maintenance sur gpuserver.io depuis septembre 2022, mois par mois, avec chronologie et revue post-incident.
- Accord de niveau de serviceL’engagement de 99,9 % : la définition d’une panne, la mesure externe, cinq minutes de durée d’engagement rendues par minute perdue, et les exclusions en détail.
- RéseauPorts sans compteur jusqu’à 25 Gbit/s, deux opérateurs et un IX par site, filtrage DDoS permanent, IPv6 routé — et quatre choses que nous n’offrons pas, en clair.