Comparison · Raw speed against low power

# RTX 4090 or L4?

Both are dedicated, both are monthly, both open without an identity check. What separates them is memory, bandwidth and $68 a month — and which of those matters depends entirely on what you intend to run.

- $193/mo RTX 4090, one card
- $125/mo L4, one card
- 24 vs 24 GB memory per card
- 3.4× bandwidth gap

## The short answer

Which one, and when

- **Pick the RTX 4090:** when throughput matters. Same 24 GB, but 236% more memory bandwidth — which is what sets generation speed — for $68/month more.
- **Pick the L4:** when the RTX 4090 offers you nothing you need. Same memory, comparable bandwidth, $68/month cheaper.
- **Neither, if:** your model does not fit on a single card of either. Sharding costs synchronisation at every layer — see the [interconnect guide](https://gpuserver.io/guides/nvlink-vs-pcie) before buying a multi-GPU node.

## Side by side

**RTX 4090 compared with L4**

|  | [RTX 4090](https://gpuserver.io/gpu/rtx-4090) | [L4](https://gpuserver.io/gpu/nvidia-l4) | Difference |
|---|---|---|---|
| Architecture | Ada Lovelace | Ada Lovelace | Same generation |
| Memory per card | 24 GB GDDR6X | 24 GB GDDR6 | Identical |
| Memory bandwidth Predicts generation speed | 1,008 GB/s | 300 GB/s | 3.36× in favour of the RTX 4090 |
| Form factor | PCIe add-in card | PCIe add-in card | Same |
| Node sizes | 1×, 2×, 4×, 8× | 1×, 2×, 4×, 8×, 10× | Up to 240 GB in one node |
| From, per month | $193 | $125 | $68/month apart |

## Price at every node size

**Monthly price of both cards at each available node size**

| Node | RTX 4090 | L4 | Total VRAM |  |
|---|---|---|---|---|
| 1 × GPU | $193/mo | $125/mo | 24 GB / 24 GB | [RTX 4090](https://gpuserver.io/configure?c=rtx4090-x1) [L4](https://gpuserver.io/configure?c=l4-x1) |
| 2 × GPU | $416/mo | $285/mo | 48 GB / 48 GB | [RTX 4090](https://gpuserver.io/configure?c=rtx4090-x2) [L4](https://gpuserver.io/configure?c=l4-x2) |
| 4 × GPU | $814/mo | $564/mo | 96 GB / 96 GB | [RTX 4090](https://gpuserver.io/configure?c=rtx4090-x4) [L4](https://gpuserver.io/configure?c=l4-x4) |
| 8 × GPU | $1,579/mo | $1,106/mo | 192 GB / 192 GB | [RTX 4090](https://gpuserver.io/configure?c=rtx4090-x8) [L4](https://gpuserver.io/configure?c=l4-x8) |
| 10 × GPU | not offered | $1,371/mo | 240 GB | [L4](https://gpuserver.io/configure?c=l4-x10) |

## What each one holds on a single card

At 8k context, best precision that fits. This is the difference that decides a purchase — not the specification sheet.

### Only the RTX 4090

Nothing. Every model the RTX 4090 holds on one card, the L4 holds too — the difference between them is speed, not capability.

### Only the L4

Nothing. The RTX 4090 holds everything the L4 does.

**The same model on both: Qwen 3 32B.** On the RTX 4090, roughly 28 tokens/second at 4-bit (AWQ, GPTQ); on the L4, roughly 8. Single-stream and deliberately conservative — with continuous batching the aggregate is several times higher on both. Treat the *ratio* as the useful number, not the absolute.

## Cost per GB and per TB/s

Two ratios that cut through the specification sheet. The first tells you what memory costs; the second what speed costs.

**Cost per gigabyte of VRAM and per terabyte per second of bandwidth**

| Card | $/GB of VRAM, per month | $/TB per second, per month | Better at |
|---|---|---|---|
| [RTX 4090](https://gpuserver.io/gpu/rtx-4090) | $8.04 | $191 | Neither |
| [L4](https://gpuserver.io/gpu/nvidia-l4) | $5.21 | $125 | Both ratios |

These ratios rank cards; they do not choose one. A card that is cheaper per gigabyte is worthless if it has too few gigabytes to hold your model at all — capacity is a threshold, not a slope. Use them to break a tie between two cards that both fit.

## RTX 4090 against L4, in short

Is the RTX 4090 worth the extra money over the L4?

It costs $68 more a month — 54% — for 236% more memory bandwidth. Both hold the same set of models on a single card, so the difference is speed rather than capability.

Which one is faster for LLM inference?

Generation speed is bounded by memory bandwidth, because each token requires re-reading the active weights. The RTX 4090 has 1,008 GB/s against 300 GB/s, so the RTX 4090 leads by roughly 236% on a model both of them hold.

Do both come as multi-GPU nodes?

RTX 4090: 1×, 2×, 4×, 8×. L4: 1×, 2×, 4×, 8×, 10×. Both are PCIe cards, joined peer-to-peer over the bus rather than by NVLink.

Can I rent either without an identity check?

Yes, both, on the same terms. No document, no selfie, no phone number and no company registration, at any level of spend. Payment is in cryptocurrency, each invoice gets its own address, and root access arrives under 5 minutes after the first confirmation.

## Other comparisons

- [RTX 5090 vs RTX 4090  The consumer flagship, one generation apart Compare](https://gpuserver.io/compare/rtx-5090-vs-rtx-4090)
- [RTX 4090 vs A100 PCIe  The cheap fast card against the data-centre one Compare](https://gpuserver.io/compare/rtx-4090-vs-a100-40gb)

## Both are racked and waiting, in all 6 data centres.

Whichever you pick, it is monthly, paid in crypto, opened without an identity check and delivered in under 5 minutes.

[Open the configurator](https://gpuserver.io/configure) [Read the guides](https://gpuserver.io/guides)

---

Source: https://gpuserver.io/compare/rtx-4090-vs-nvidia-l4/. This file is generated from the same data as the website; if a figure here differs from a page, the page is authoritative and this file is stale — the canonical source is https://gpuserver.io/.